PJ2-3BRL-GWH-F01
Hoạt độngPico Fan Speed Remote White
Lutron Pico remote for fan speed control.
Ứng Dụng Phổ Biến
Dedicated fan speed remote — high/medium/low/off with a favorite button. Pairs with Lutron Caseta fan speed controller. Same form factor as lighting Pico. 10-year battery. The clean way to control ceiling fans without pull chains.
Research Notes
1. Overview
The PJ2-3BRL-GWH-F01 is a Lutron Pico wireless remote configured for ceiling-fan speed control in the Caséta ecosystem. It is a 3-button "raise/lower" (3BRL) Pico with a center favorite preset: on/off, fan-speed raise, fan-speed lower, plus the saved-speed button. It communicates over Lutron's proprietary Clear Connect RF and is battery-powered (no wiring). Critically, it is the dedicated controller for the PD-FSQN Caséta Fan Speed Control — the F01 Pico is the only Pico that pairs to the PD-FSQN.
2. User Sentiment
Well regarded for Lutron's hallmark reliability, long battery life, and clean tactile buttons. Owners like the flexibility of using it handheld, on a tabletop pedestal, or wall-mounted in a Claro/gang wallplate. The main friction points are ecosystem cost (a Caséta SmartBridge hub and the PD-FSQN module are needed for the full smart experience) and that the F01 is fan-specific — it won't substitute for a dimmer Pico.
3. Real-World Applications
Controlling a ceiling fan's four speeds and off from anywhere in the room, replacing pull-chains, or adding a wall control where none is wired. Common in Caséta whole-home setups alongside dimmer Picos and Lutron shades.
4. Technical Specifications
- Type: Battery wireless fan-speed remote (Pico), 3-button raise/lower + favorite
- Protocol: Lutron Clear Connect RF (~434 MHz), proprietary
- Fan speeds: 4 speeds + off; center button recalls a saved favorite speed
- Range: ~30 ft (9 m) through walls, ~60 ft (18 m) line-of-sight
- Power: CR2032 coin cell, ~10-year battery life
- Mounting: handheld / tabletop pedestal / wall (Pico wallplate)
- Color: Gloss White (GWH); variants incl. Ivory (GIV) and retail-pack F01R
5. Ordering & Compatibility
- Requires: PD-FSQN Caséta Fan Speed Control (the module it controls) and, for app/voice control, a Caséta SmartBridge hub.
- Integrations (via the Caséta hub): Apple HomeKit, Amazon Alexa, Google Home; also a well-supported Home Assistant Lutron Caséta integration (LEAP).
- Pairs to the PD-FSQN during its setup; one PD-FSQN per fan.
6. Hackability & Known Issues
- Hackability: limited/hub-gated — Clear Connect is proprietary, so there is no direct open-protocol control, but the Caséta SmartBridge (esp. Bridge Pro) exposes a documented LEAP/telnet API that Home Assistant and others use. Not open like Zigbee, but scriptable through the hub.
- Known issues: none notable for reliability; the recurring gotcha is buying the wrong Pico — only the -F01 fan Pico drives the PD-FSQN, and it needs that specific fan module.
4 sources
- The Pico Remote and its use in the Caseta System — support.lutron.com
- Lutron PJ2-3BRL-GWH-F01 Pico Smart Remote for Fan Control — prolighting.com
- Lutron Pico Remote for Caseta Smart Fan Speed Control PJ2-3BRL-GWH-F01 — amazon.com
- Lutron PJ2-3BRL-GWH-F01 Pico 3-Button Wireless Fan Remote — beeslighting.com
Tính Mở & Khả Năng Tùy Biến
Proprietary Clear Connect RF. Cannot flash or intercept. But Caseta hub has excellent local API for Home Assistant/HomeKit.
Thông số kỹ thuật
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
10 years
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032
|
|
Buttons
|
3-button raise/lower + center favorite (on/off, speed up/down, saved speed)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Fan speeds
|
4 speeds + off
|
|
Hackability
|
Limited/hub-gated — Clear Connect proprietary; scriptable via Caseta SmartBridge LEAP API (Home Assistant supported)
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Lutron Caseta, HomeKit, Alexa, Google Home
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Clear Connect RF (434MHz)
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
~30ft through walls / ~60ft line-of-sight
|
|
Requires
|
PD-FSQN Caseta Fan Speed Control (+ Caseta SmartBridge hub for app/voice)
|
Hướng Dẫn Cài Đặt Nhanh
Setup: Pair with your hub or phone via Clear Connect RF (434MHz). Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 battery. Expected life: 10 years. Low battery notification via the app.
Kích thước
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nơi Mua Hàng
Dải giá
$15.13 — $57.56
từ 2 nhà phân phối
Thông số kỹ thuật nhanh
- Battery Life
- 10 years
- Battery Type
- CR2032
- Buttons
- 3-button raise/lower + center favorite (on/off, speed up/down, saved speed)
- Color
- White
- Fan speeds
- 4 speeds + off
Những Đánh Giá Từ Khách Hàng
“Dedicated fan speed remote — high/medium/low/off with a favorite button. Pairs with Lutron Caseta fan speed controller. Same form factor as lighting Pico. 10-year battery. The clean way to control cei”
