KSS350
Hoạt độngKSS350 Destination Dispatch Touch Button
Destination-selection touch button from KONE for advanced dispatch systems. Capacitive touch interface with floor number display. Passengers select their destination floor at the landing, and the system assigns the optimal elevator.
Ứng Dụng Phổ Biến
Used in KONE destination dispatch elevator systems in modern high-rise office buildings and hotels. Passengers enter their desired floor at the hallway terminal rather than inside the car, enabling the system to group passengers by destination for faster travel times.
Thông số kỹ thuật
|
ADA Compliant
Meets Americans with Disabilities Act requirements for accessible design.
|
yes (EN 81-70, companion ADA panel available)
|
|
Braille Compatible
Whether the button has Braille markings for visually impaired users. Required by ADA in the US.
|
no
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, EN 81-70, EN 81-20
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
TFT display backlight
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V DC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Tempered glass with stainless steel bezel
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
flush
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
50°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-10°C
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK07 (2J impact)
|
Thông số kỹ thuật có biểu tượng này được liên kết đến trang nguồn gốc của nhà sản xuất
Hướng Dẫn Cài Đặt Nhanh
Installation: Professional elevator technician required. Must comply with local elevator codes (ASME A17.1 / EN 81). Braille plates must be positioned per ADA requirements (48" max height for side reach).
Kích thước
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nơi Mua Hàng
Thông số kỹ thuật nhanh
- ADA Compliant
- yes (EN 81-70, companion ADA panel available)
- Braille Compatible
- no
- Certifications
- CE, EN 81-70, EN 81-20
- Illumination
- TFT display backlight
- IP Rating
- IP54
Những Đánh Giá Từ Khách Hàng
“KONE KSS350 is spec-compliant and holds up in real buildings. ADA and local code compliance is the priority — aesthetics are secondary.”
Tìm Hiểu Thêm
Nguồn Dữ Liệu
Thông số kỹ thuật và dữ liệu sản phẩm được trích dẫn từ các tài liệu tham khảo sau.