10250T181
Hoạt động10250T 30mm Green Pilot Light 120V
Cutler-Hammer 10250T heavy-duty 30mm push button — legacy American industrial standard.
Ứng Dụng Phổ Biến
The original heavy-duty American industrial push button. If you are maintaining equipment built between 1960-2000 with Cutler-Hammer controls, these are the buttons. 30mm heavy-duty with NEMA 4/13 rating. Eaton still manufactures direct replacements since they acquired Cutler-Hammer in 1978. The 10250T was to Cutler-Hammer what the 800T is to Allen-Bradley.
Tương thích
Legacy 30.5mm Cutler-Hammer part. Direct Eaton replacement: Eaton 10250T series (same part number — Eaton continues manufacturing under the old numbering). Not compatible with 22mm buttons — requires 30.5mm panel cutout. For new builds, consider migrating to Eaton M22 (22mm) to modernize.
Sửa chữa & Bảo trì
Same heavy-duty construction as Allen-Bradley 800T. Contact blocks are replaceable. 30.5mm panel cutout means you cannot drop in a 22mm button without an adapter plate.
Thông số kỹ thuật
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
30.5mm
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
NEMA 4/13
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
120V AC (transformer type)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 30.5mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
Kích thước
Khắc phục sự cố
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
Nơi Mua Hàng
Dải giá
$9.37 — $82.45
từ 2 nhà phân phối
Thông số kỹ thuật nhanh
- Actuator Function
- Momentary
- Actuator Type
- Flush
- Certifications
- UL, CSA
- Color
- Green
- Cutout Diameter
- 30.5mm
Những Đánh Giá Từ Khách Hàng
“The original heavy-duty American industrial push button. If you are maintaining equipment built between 1960-2000 with Cutler-Hammer controls, these are the buttons. 30mm heavy-duty with NEMA 4/13 rat”