MX2A-L1NA
Hoạt độngCherry MX2A-L1NA RGB Red Linear (full travel)
Cherry MX2A Silent Red — redesigned silent linear.
Ứng Dụng Phổ Biến
The 2024 redesign of the MX Silent Red. Smoother dampening, less mushy bottom-out than the original. Cherrys premium silent offering for office and streaming keyboards.
Thông số kỹ thuật
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
45cN (45g)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red stem
|
|
Keycap compat
|
MX-compatible
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
100,000,000 cycles
|
|
Pn note
|
Corrected: MX2A-L1NA = standard MX2A RGB RED, red stem, FULL travel (Mouser: MX RGB, Red Stem, Full Travel). Was mislabeled Silent Red / pink stem / reduced travel. Cherry silent MX2A = different code.
|
|
Pn status
|
mislabel-corrected
|
|
Switch type
|
Linear, standard full travel (MX2A RGB Red) — NOT silent
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
~2.0mm actuation, ~4.0mm total (full travel)
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nơi Mua Hàng
Dải giá
$1.42 — $160.85
từ 3 nhà phân phối
Thông số kỹ thuật nhanh
- Actuation Force
- 45cN (45g)
- Color
- Red stem
- Keycap compat
- MX-compatible
- Mechanical Life
- 100,000,000 cycles
- Pn note
- Corrected: MX2A-L1NA = standard MX2A RGB RED, red stem, FULL travel (Mouser: MX RGB, Red Stem, Full Travel). Was mislabeled Silent Red / pink stem / reduced travel. Cherry silent MX2A = different code.
Những Đánh Giá Từ Khách Hàng
“The 2024 redesign of the MX Silent Red. Smoother dampening, less mushy bottom-out than the original. Cherrys premium silent offering for office and streaming keyboards.”
Tìm Hiểu Thêm
Thêm sản phẩm từ Cherry
Cherry
80RETROS X HMX 1989 CLASSIC 45G LINEAR PCB MOUNT SWITCHES 35
80Retros x HMX 1989 Classic 45g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX FJ400 50G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX FJ400 50g Linear PCB Mount Switches 35 Pack
Cherry
80RETROS X HMX JOKER 45G LINEAR PCB MOUNT SWITCHES 35 PACK
80Retros x HMX Joker 45g Linear PCB Mount Switches 35 Pack