LIGHT SAKURA SILENT 37G LINEAR PCB MOUNT
Hoạt độngBSUN Light Sakura Silent 37g Linear PCB Mount Switch
37g actuation force 43g bottom out force 2.0mm pretravel 3.6mm total travel Polycarbonate top and bottom housing material LY stem material 22mm extended spring Notched light pipe for an increased RGB backlighting effect Factory lubed
Ghi chú Nghiên cứu
1. What this is
LIGHT SAKURA SILENT 37G LINEAR PCB MOUNT ("BSUN Light Sakura Silent 37g Linear PCB Mount Switch") is catalogued as a smart-home control device (button / switch / remote / knob) from BSUN.
2. What we know
- Manufacturer: BSUN
- Category: smart-home control device (button / switch / remote / knob)
- Part number / name: LIGHT SAKURA SILENT 37G LINEAR PCB MOUNT — BSUN Light Sakura Silent 37g Linear PCB Mount Switch
- BSUN makes smart-home / IoT devices (typically Zigbee, Matter, or Wi-Fi). This entry is a smart-home control device (button / switch / remote / knob); the product name describes its function.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the BSUN catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS). For smart-home devices, confirm the wireless protocol (Zigbee / Matter / Wi-Fi / Thread) and hub compatibility.
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- BSUN product catalog — search "LIGHT SAKURA SILENT 37G LINEAR PCB MOUNT" / "BSUN Light Sakura Silent 37g Linear PCB Mount Switch"
Nguồn
- BSUN LIGHT SAKURA SILENT 37G LINEAR PCB MOUNT — distributor/catalog
Thông số kỹ thuật
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Keyboard Switches
|
|
Shopify id
|
9716941062444
|
|
Vendor
|
BSUN
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Thông số kỹ thuật nhanh
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- Keyboard Switches
- Shopify id
- 9716941062444
