Pushbutton Switches Wireless Q120 Pendant Node 900 Mhz; Integrated Battery; Two Operator Inputs (2 Flush Push Buttons); Four Color LED Indicator Light Output
Research Notes
1. What this is
DX80N9Q120PPB11 is a Banner Engineering wireless node.
2. Part-number decode
- Series: Banner Engineering DX80/wireless
- Type: wireless node
3. Compatibility & ordering
Banner Engineering makes illuminated E-stop buttons (SSA), indicator/pick-to-light devices (K50/K80), tower lights, and wireless nodes. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The Banner Engineering product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- Banner Engineering product catalog (bannerengineering.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
1 source
- Banner Engineering — DX80N9Q120PPB11 — bannerengineering.com
Thông số kỹ thuật
|
Device class
|
wireless node
|
|
Enriched by
|
banner-decoder-2026-08-12
|
|
Lead time
|
14 Days
|
|
Manufacturer series
|
DX80/wireless
|
|
Mouser part number
|
778-DX80N9Q120PPB11
|
|
Pn status
|
decoded-partial
|
|
Rohs status
|
|
|
Series description
|
Banner DX80/DXM-series wireless radio node / sensor gateway (not a panel switch)
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nơi Mua Hàng
Thông số kỹ thuật nhanh
- Device class
- wireless node
- Enriched by
- banner-decoder-2026-08-12
- Lead time
- 14 Days
- Manufacturer series
- DX80/wireless
- Mouser part number
- 778-DX80N9Q120PPB11
