IQC1S432
Hoạt độngIQC 22mm Stainless Steel Push Button IP67
APEM IQC vandal-resistant stainless push button with ring LED.
Ứng Dụng Phổ Biến
APEM IQC series is used in military vehicles, naval vessels, railway control panels, and outdoor kiosks. The 316L stainless construction meets MIL-STD environmental requirements. Ring LED illumination available in 7 colors. IP67 front face with IK09 impact rating. When the application demands military-grade durability, APEM is the brand.
Thông số kỹ thuật
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, MIL-STD-810
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP67: Dust-tight and survives temporary water submersion (1m for 30 min). Handles oil splashes, steam cleaning, and rain.
|
IP67
|
|
LED Type
The style of built-in LED illumination. Ring = glows around the edge. Dot = center point. Power symbol = illuminated power icon.
|
Ring LED (7 colors)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
316L Stainless Steel
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
1,000,000 cycles
|
|
Vandal Rating (IK)
IK rating for impact resistance. IK09 = 10 joules (hammer blow). IK10 = 20 joules (serious vandalism). Higher is tougher.
|
IK09
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nơi Mua Hàng
Dải giá
$17.08 — $57.3
từ 2 nhà phân phối
Thông số kỹ thuật nhanh
- Actuator Function
- Momentary
- Certifications
- CE, MIL-STD-810
- Cutout Diameter
- 22mm
- IP Rating
- IP67
- LED Type
- Ring LED (7 colors)
Những Đánh Giá Từ Khách Hàng
“APEM IQC series is used in military vehicles, naval vessels, railway control panels, and outdoor kiosks. The 316L stainless construction meets MIL-STD environmental requirements. Ring LED illumination”
