2AF8

Hoạt động

Altech 2AF8

Altech 2AF8 — Altech 2AF8

Ảnh loạt sản phẩm: người bán sử dụng cho 3 bộ phận khác nữa, vì vậy có thể không hiển thị phiên bản chính xác này.

Switch Actuators Push Button Operator, 22 mm,

Ghi chú Nghiên cứu

1. What this is

2AF8 is an Altech 2AF-series 22mm non-illuminated metal-operator flush pushbutton (metal bezel, momentary or maintained per config).

2. Part-number decode

  • Series: Altech 2AF
  • Panel cutout: 22mm
  • Operator material: Metal

3. Compatibility & ordering

Altech 22/30mm pushbuttons are cost-effective IEC-style panel operators. Match by size (22mm), operator material (metal vs plastic), illumination (and voltage), action, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, Siemens 3SU, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Altech series is decoded from the part number (grounded in Altech's 22mm pushbutton tech-spec sheet and distributor listings). Exact contact arrangement and cap/color depend on the full config code — confirm against the Altech datasheet for a precise order.

5. Sources

  • Altech Corp datasheet / 22mm pushbutton tech specs (altechcorp.com)
  • Distributor listing (Mouser / Future Electronics) — search the exact part number

Nguồn
  1. Altech Corp — 2AF8 — altechcorp.com

Thông số kỹ thuật

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
13 Days
Manufacturer series
2AF
Mouser part number
845-2AF8
Operator material
metal
Panel cutout
22mm
Pn status
decoded
Rohs status
Series description
Altech 2AF-series 22mm non-illuminated metal-operator flush pushbutton (metal bezel, momentary or maintained per config)

Hướng Dẫn Cài Đặt Nhanh

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Kích thước

Khắc phục sự cố

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Hình ảnh & Bản vẽ

Hình ảnh: mouser.com

Thông số kỹ thuật nhanh

Device class
pushbutton
Enriched by
altech-decoder-2026-08-12
Lead time
13 Days
Manufacturer series
2AF
Mouser part number
845-2AF8