800F-ASM2A2
Hoạt động22mm 2-Position Selector Maintained
Allen-Bradley 800F 2-position selector switch, maintained.
Ứng Dụng Phổ Biến
Manual/Auto selector for AB panels. The maintained 2-position is the standard for pump stations, HVAC, and conveyor hand/auto control on Rockwell systems.
Thông số kỹ thuật
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Maintained
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
1NO+1NC
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Kích thước
Sơ đồ đấu dây
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nơi Mua Hàng
Dải giá
$26.82 — $46.04
từ 2 nhà phân phối
Thông số kỹ thuật nhanh
- Actuator Function
- Maintained
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO+1NC
- Cutout Diameter
- 22mm
- IP Rating
- IP66
Những Đánh Giá Từ Khách Hàng
“Allen-Bradley 800F-ASM2A2 is a solid choice for selector switch applications. Standard specs, well-supported.”