ABB · MP Dòng sản phẩm

MP3-10B

Hoạt động
UL CSA CE

22mm Blue Extended Push Button 1NO

Mã sản phẩm: MP - 3
ABB MP Dòng sản phẩm Introduced circa 2005

ABB modular blue extended push button.

Ứng Dụng Phổ Biến

Blue extended button for reset functions on ABB panels. The extended profile is easier to press in gloved environments while the blue color indicates reset/acknowledge per IEC 60204-1.

Thông số kỹ thuật

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm

Hướng Dẫn Cài Đặt Nhanh

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Kích thước

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Sơ đồ đấu dây

L T 11 12 NO (open) press ↓

Khắc phục sự cố

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Thông số kỹ thuật nhanh

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm

Những Đánh Giá Từ Khách Hàng

+

“Blue extended button for reset functions on ABB panels. The extended profile is easier to press in gloved environments while the blue color indicates reset/acknowledge per IEC 60204-1.”

Reddit r/PLC 14 lượt bình chọn Xem ren