3SB2-210-0AB01
Aktif3SB2 30mm Green Flush Button Legacy
Siemens 3SB2 legacy 30mm push button — predecessor to SIRIUS ACT.
Yaygın Uygulamalar
Legacy Siemens 30mm button found on older German/European machinery from 1990-2013. Replaced by the 22mm SIRIUS ACT 3SU1 series. Still available for legacy replacement. If you see 3SB on a Siemens panel, these are the buttons.
Uyumluluk
Legacy 30mm — not compatible with 22mm SIRIUS ACT. For new builds, migrate to 3SU1 (22mm). 30mm cutout requires adapter plate for 22mm replacement.
Teknik Özellikler
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
30mm
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
Hızlı Montaj Kılavuzu
Panel cutout: 30mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Boyutlar
Sorun Giderme
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nereden Satın Alınır
Fiyat aralığı
$3.02 — $51.07
2 distribütörde
Kısa Teknik Özellikler
- Actuator Type
- Flush
- Certifications
- CE
- Color
- Green
- Cutout Diameter
- 30mm
- Material
- Metal
Kullanıcı Görüşleri
“Legacy Siemens 30mm button found on older German/European machinery from 1990-2013. Replaced by the 22mm SIRIUS ACT 3SU1 series. Still available for legacy replacement. If you see 3SB on a Siemens pan”