ZBZ1604

Aktif

Schneider Electric ZBZ1604 Padlockable Guard

Schneider Electric ZBZ1604 — Schneider Electric ZBZ1604 Padlockable Guard

Schneider Electric ZBZ1604 Padlockable Guard The Schneider Electric ZBZ1604 is a padlockable guard. It has a mushroom head actuator type. The ZBZ1604 has a panel mounting type and it is used for 40mm emergency stop push buttons.

Araştırma Notları

1. What this is

ZBZ1604 is a Schneider Electric Harmony ZBZ mounting/contact-block accessory (for XB4/XB5 assembly).

2. Part-number decode

  • Series: Harmony ZBZ
  • Panel cutout: 22mm
  • Type: accessory

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series/family is identified; bezel/size are indicative and the exact colour/contact configuration is left to the Schneider datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

Kaynak
  1. Schneider Electric — ZBZ1604 — se.com

Teknik Özellikler

Component type
accessory
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony ZBZ
Panel cutout
22mm
Pn status
decoded-partial
Product type
Padlockable Guard
Wireless Range
Harmony / Square D Class 9001
Series description
Schneider Harmony ZBZ mounting/contact-block accessory (for XB4/XB5 assembly)
Shopify id
8346411303225
Vendor
Schneider Electric

Hızlı Montaj Kılavuzu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Boyutlar

Sorun Giderme

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotoğraflar ve Çizimler

Görseller: cdn.shopify.com

Nereden Satın Alınır

Fiyat aralığı

$73.95 — $73.95

from 1 seller in US dollars

Kısa Teknik Özellikler

Component type
accessory
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Harmony ZBZ
Panel cutout
22mm
Pn status
decoded-partial