CPG1511-RED
AktifKailh Choc V1 Red Low-Profile Linear
Kailh Choc V1 low-profile linear — half the height of MX switches.
Yaygın Uygulamalar
Low-profile switch for slim keyboards. Total travel 3mm vs 4mm for MX. Used in Keychron K3, Nuphy Air, and other slim mechanical keyboards. The Choc stem is NOT MX-compatible — requires Choc-specific keycaps. Growing ecosystem of custom low-profile boards.
Teknik Özellikler
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red stem
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
50,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Choc low-profile PCB mount
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
1.5mm actuation, 3mm total
|
Hızlı Montaj Kılavuzu
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Boyutlar
Sorun Giderme
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nereden Satın Alınır
Fiyat aralığı
$7.02 — $67.6
2 distribütörde
Kısa Teknik Özellikler
- Actuation Force
- 50g
- Color
- Red stem
- Mechanical Life
- 50,000,000 cycles
- Mounting Type
- Choc low-profile PCB mount
- Travel Distance
- 1.5mm actuation, 3mm total
Kullanıcı Görüşleri
“Low-profile switch for slim keyboards. Total travel 3mm vs 4mm for MX. Used in Keychron K3, Nuphy Air, and other slim mechanical keyboards. The Choc stem is NOT MX-compatible — requires Choc-specific ”
