ABB · MP Seri

MPD1-10B

Aktif
UL CSA CE

22mm Blue Illuminated Flush 24V ABB

Parça numarası: MP
ABB MP Seri Introduced circa 2005

ABB illuminated blue push button.

Yaygın Uygulamalar

Blue illuminated for reset/acknowledge on ABB panels.

Teknik Özellikler

Certifications
UL, CSA, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm
Illumination
Illuminated
IP Rating
IP66
LED Voltage
24V AC/DC

Hızlı Montaj Kılavuzu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Boyutlar

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Bağlantı Şeması

L T 11 12 NO (open) press ↓

Sorun Giderme

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Nereden Satın Alınır

Fiyat aralığı

$89.15 — $90.77

2 distribütörde

Kısa Teknik Özellikler

Certifications
UL, CSA, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm
Illumination
Illuminated

Kullanıcı Görüşleri

+

“Blue illuminated for reset/acknowledge on ABB panels.”

Reddit r/PLC 29 olumlu oy Konuyu görüntüle →