SparkFun Accessories It's the end of the world and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted
บันทึกการวิจัย
1. What this is
COM-09181 ("SparkFun COM-09181") is catalogued as a smart-home control device (button / switch / remote / knob) from SparkFun.
2. What we know
- Manufacturer: SparkFun
- Category: smart-home control device (button / switch / remote / knob)
- Part number / name: COM-09181 — SparkFun COM-09181
- SparkFun makes smart-home / IoT devices (typically Zigbee, Matter, or Wi-Fi). This entry is a smart-home control device (button / switch / remote / knob); the product name describes its function.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the SparkFun catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS). For smart-home devices, confirm the wireless protocol (Zigbee / Matter / Wi-Fi / Thread) and hub compatibility.
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.
5. Sources
- SparkFun product catalog — search "COM-09181" / "SparkFun COM-09181"
แหล่งที่มา
- SparkFun COM-09181 — distributor/catalog
ข้อมูลจำเพาะ
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Lead time
|
0 Days
|
|
Mouser part number
|
474-COM-09181
|
|
Pn status
|
needs-verification
|
|
Rohs status
|
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
ขนาด
การแก้ไขปัญหา
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
สถานที่จำหน่าย
ข้อมูลจำเพาะอย่างย่อ
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Lead time
- 0 Days
- Mouser part number
- 474-COM-09181
- Pn status
- needs-verification