SHBTN-2
ใช้งานอยู่Shelly Button 1 WiFi Smart Button
Shelly Button 1 — WiFi smart button with local API.
การใช้งานทั่วไป
The most hackable commercial smart button. Runs on ESP8266 internally — can be flashed with Tasmota or ESPHome via OTA (no soldering). But even stock firmware has a local HTTP API and MQTT support. No cloud required for basic operation. Press events (single, double, triple, long) trigger webhooks, MQTT messages, or Shelly scenes. The reference for what a smart button should be.
บันทึกการวิจัย
1. Overview
The Shelly Button1 is a compact, battery-powered Wi-Fi (2.4 GHz) smart button from Shelly (Allterco) that fires four distinct actions — single, double, triple, and long press — to trigger scenes, other Shelly devices, or any HTTP/MQTT endpoint. Its defining trait for the maker crowd is a fully local HTTP REST API and MQTT support: it works without the cloud and integrates natively with Home Assistant. It has a built-in rechargeable battery (USB-C), an IP54 rating, and can also act as a Wi-Fi range-extender/repeater while charging. The hardware/firmware is labelled SHBTN-2 (which is why some tools show it as "Shelly Button 2"). Sold in white and black.
2. User Sentiment
A favorite among DIY smart-home users precisely because it's open and local — REST + MQTT, no vendor lock-in, no subscription, and easy Home Assistant integration. Praised for four programmable press actions in a tiny package. The main gripe is inherent to battery Wi-Fi buttons: on each press it must wake and join Wi-Fi, adding a short latency before the action fires (and heavier use shortens battery life). A stable 2.4 GHz signal at the button's location matters.
3. Real-World Applications
A portable, stick-anywhere controller: toggle lights/scenes, trigger Home Assistant automations, send MQTT messages, call webhooks, or control other Shelly relays — with different behavior for single/double/triple/long press. Good for bedside, doorway, or "panic/scene" buttons without running wiring.
4. Technical Specifications
- Type: Wi-Fi (2.4 GHz) battery action button; 4 actions (1×/2×/3×/long press)
- Power: built-in rechargeable Li-ion, USB-C charging; ~6-month typical battery
- Control: local HTTP REST API + MQTT; Shelly Cloud optional; CoIoT
- Ecosystem: Home Assistant (native), Alexa, Google Home, Shelly app
- Sealing / color: IP54; white or black
- Extra: can serve as a Wi-Fi repeater while plugged in
5. Ordering & Compatibility
Sold by Shelly and smart-home retailers (white/black). Configured via the Shelly app or directly over its local web/HTTP interface. Because it exposes standard HTTP + MQTT, it drops into Home Assistant, Node-RED, openHAB, etc. without cloud dependency.
6. Hackability & Known Issues
- Hackability: high. Local REST API + MQTT + CoIoT, documented endpoints, cloud fully optional, and (on the ESP-based Shellys) the community has flashed Tasmota/ESPHome onto Shelly hardware. This is close to the ideal "open smart button."
- Known issues: battery-Wi-Fi wake latency on each press, battery drain with frequent use / poor Wi-Fi, 2.4 GHz-only, and the SHBTN-2 label causing "Button 1 vs Button 2" naming confusion.
แหล่งที่มา
- Shelly Button 1 — official — shelly.com
- The Smart Shelly Button 1 (MQTT) — scargill.net
ความเปิดกว้างและความสามารถในการปรับแต่ง
เฟิร์มแวร์แบบกำหนดเอง Stock (local HTTP API + MQTT), Tasmota, ESPHome (OTA flashable)
Best-in-class openness. Stock firmware includes local HTTP REST API, MQTT client, and CoAP — all work without internet. OTA flashable to Tasmota or ESPHome with zero soldering. Home Assistant auto-discovers Shelly devices. The gold standard for hackable smart buttons.
ซ่อมบำรุง
Rechargeable battery accessed by prying open the case with a plastic spudger. Battery is a small LiPo pouch cell. The ESP8266 chip is accessible for serial flashing if OTA fails. Reset by holding the button for 10 seconds during power-up.
ข้อมูลจำเพาะ
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
6 months typical
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
Rechargeable (USB-C)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Shelly Cloud (optional), Home Assistant, MQTT, HTTP API, Alexa, Google Home
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
WiFi 2.4GHz
|
คู่มือการติดตั้งอย่างรวดเร็ว
Setup: Pair with your hub or phone via WiFi 2.4GHz. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses Rechargeable (USB-C) battery. Expected life: 6 months typical. Low battery notification via the app.
ขนาด
การแก้ไขปัญหา
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
สถานที่จำหน่าย
ช่วงราคา
$91.65 — $171.6
across 2 sellers in US dollars
ข้อมูลจำเพาะอย่างย่อ
- Battery Life
- 6 months typical
- Battery Type
- Rechargeable (USB-C)
- Color
- White
- Smart Home Integrations
- Shelly Cloud (optional), Home Assistant, MQTT, HTTP API, Alexa, Google Home
- IP Rating
- IP54
สิ่งที่ผู้คนพูดถึง
“Best-in-class openness. Stock firmware includes local HTTP REST API, MQTT client, and CoAP — all work without internet. OTA flashable to Tasmota or ESPHome with zero soldering. Home Assistant auto-dis”