A22-FR-01M
ใช้งานอยู่A22 Red Flush Push Button (1NC)
Red flush momentary push button, Omron A22 series. 22mm cutout, IP65, with 1NC contact.
การใช้งานทั่วไป
Red stop button from the Omron A22 series. Standard on Omron-controlled production lines in electronics manufacturing, food packaging, and semiconductor handling equipment. The 1NC contact breaks the circuit on press. In Japanese and Korean factories, Omron buttons are the default choice — if you are maintaining imported Japanese machinery, this is likely what you will find on the control panel.
ข้อมูลจำเพาะ
|
Actuator Shape
The physical shape of the pressable surface.
|
Round
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Closed — circuit is on until you press. Standard for stop/emergency functions. Wire in series with safety circuits.
|
1NC
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Plastic
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel
|
|
Max Operating Temp
Highest temperature the button is rated to operate in.
|
55°C
|
|
Min Operating Temp
Lowest temperature the button is rated to operate in.
|
-10°C
|
รายการสเปคที่มีไอคอนนี้เชื่อมโยงไปยังหน้าต้นฉบับของผู้ผลิต
ทางเลือกที่ใช้งานร่วมกันได้
ผลิตภัณฑ์เหล่านี้เป็นทางเลือกที่ใช้งานได้เหมือนกันจากผู้ผลิตรายอื่น
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
ขนาด
แผนภาพการเดินสายไฟฟ้า
การแก้ไขปัญหา
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
สถานที่จำหน่าย
ช่วงราคา
$1.84 — $5.72
จาก 3 ผู้จัดจำหน่าย
ข้อมูลจำเพาะอย่างย่อ
- Actuator Shape
- Round
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE
- Color
- Red
- Contact Configuration
- 1NC
สิ่งที่ผู้คนพูดถึง
“Solid button for panel builds. Omron A22 series is well-proven in the field. Standard 22mm mounting means easy replacement if needed.”
เรียนรู้เพิ่มเติม
แหล่งข้อมูล
ข้อมูลจำเพาะและข้อมูลผลิตภัณฑ์อ้างอิงจากแหล่งข้อมูลต่อไปนี้
A22-FR-01M via Omron
https://www.ia.omron.com/products/family/3482/
เข้าถึงเมื่อ April 04, 2026