JASMINE MILK GREEN 48G

Name: Keygeek JASMINE MILK GREEN 48G
Brand: Keygeek
SKU: JASMINE MILK GREEN 48G
Price: 0.38 USD
Availability: InStock

ใช้งานอยู่

Keygeek Jasmine Milk Green 48g Switch

48g actuation force 55g bottom out force 1.8mm pretravel 4.0mm total travel POM stem POK top housing PA66 bottom housing 20mm double-stage spring

บันทึกการวิจัย

1. What this is

Keygeek Jasmine Milk Green 48g Switch is a mechanical keyboard switch from Keygeek. It is 48g.

2. Spec decode (from product name)

Actuation force: 48g

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

This is identified as a Keygeek keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

Keygeek product page / keyboard-switch community databases
Distributor / vendor listing — search the exact switch name

แหล่งที่มา

Keygeek Keygeek Jasmine Milk Green 48g Switch — keyboard-switch spec

ข้อมูลจำเพาะ

Actuation Force The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).	48g
Device class	mechanical keyboard switch
Enriched by	keyboard-decoder-2026-08-12
Pn status	needs-verification
Product type	Keyboard Switches
Series description	Keygeek mechanical keyboard switch
Shopify id	10098399019308
Vendor	Keygeek

คู่มือการติดตั้งอย่างรวดเร็ว

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

ขนาด

การแก้ไขปัญหา

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.