Emergency Stop Switches / E-Stop Switches Switch emergency-stop twist release 1NC ST/PT, mushroom-head D40, green indication ring
Research Notes
1. What this is
61-6461.4047 is a EAO Series 61 command switch.
2. Part-number decode
- Series: EAO Series 61
- Type: command switch
3. Compatibility & ordering
EAO (Switzerland) makes premium modular HMI command switches — pushbuttons, indicators, selectors, and E-stops in numbered series (04/14/45/51/56/61/82/84). Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.
4. Data-quality note
The EAO series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).
5. Sources
- EAO product catalog (eao.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
1 source
- EAO — 61-6461.4047 — eao.com
ข้อมูลจำเพาะ
|
Device class
|
command switch
|
|
Enriched by
|
eao-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
Series 61
|
|
Mouser part number
|
123-61-6461.4047
|
|
Pn status
|
decoded
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
EAO Series 61 — Swiss-made modular HMI command switch (pushbutton / illuminated pushbutton / indicator / selector / E-stop; operator + contact/LED elements assemble into a complete device)
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).
Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.
Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.
ขนาด
การแก้ไขปัญหา
E-stop won't reset (twist/pull doesn't release)
Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.
Machine doesn't stop when e-stop is pressed
Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.
Safety relay faults after e-stop reset
The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.
ข้อมูลจำเพาะอย่างย่อ
- Device class
- command switch
- Enriched by
- eao-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- Series 61
- Mouser part number
- 123-61-6461.4047
