Pushbutton Switches Pushbutton, SPDT , On-(On) , Panel Mount, Rear, Black
Research Notes
1. What this is
700SP7B10M1QEHC1BLK is an E-Switch toggle/rocker switch.
2. Part-number decode
- Series: E-Switch toggle/rocker
- Type: toggle/rocker switch
3. Compatibility & ordering
E-Switch makes tactile, pushbutton (incl. anti-vandal/illuminated), toggle, slide, and appliance switches for electronics and industrial controls. Match by type, actuation (momentary/maintained), illumination, sealing, and mounting, then use the E-Switch datasheet to confirm the exact contact form and termination encoded in the part number.
4. Data-quality note
The exact E-Switch product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.
5. Sources
- E-Switch product catalog (e-switch.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
1 source
- E-Switch — 700SP7B10M1QEHC1BLK — e-switch.com
ข้อมูลจำเพาะ
|
Device class
|
toggle/rocker switch
|
|
Enriched by
|
eswitch-decoder-2026-08-12
|
|
Lead time
|
95 Days
|
|
Manufacturer series
|
toggle/rocker
|
|
Mouser part number
|
612-700SP7B10M1QHC1B
|
|
Pn status
|
needs-verification
|
|
Rohs status
|
|
|
Series description
|
E-Switch toggle / rocker switch (numeric-series panel switch)
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
ขนาด
การแก้ไขปัญหา
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
ข้อมูลจำเพาะอย่างย่อ
- Device class
- toggle/rocker switch
- Enriched by
- eswitch-decoder-2026-08-12
- Lead time
- 95 Days
- Manufacturer series
- toggle/rocker
- Mouser part number
- 612-700SP7B10M1QHC1B
