Invisiblend Switches are a silent linear featuring a new proprietary blend that has taken years of research to produce. The blend includes an extremely rare material that can only be sourced from an elusive magical beast that's able to make itself invisible at will. When this compound is infused in the correct proportions and heated under high precision to avoid denaturing vital proteins, the result is a unique material that allows us to create a switch that is completely invisible. Our Invisiblend Switches have a housing, stem, leaf, and spring that can’t be seen, or touched. We’ve also done extensive testing to ensure this effect never diminishes. If you’re looking for a truly silent switch with unmatched RGB transmittance, then look no further! What makes our Invisiblend Switches Special? Fully Intangible: After years of research, we’ve been able to make a switch that is truly intangible. No part of this switch can be seen or touched. Truly Silent: Not only can you not see or touch these switches - You won’t be able to hear them either! We’ve completely rid spring and leaf ping by infusing all metal components with the same proprietary material. Maximum RGB Transmittance: You’ll no longer need to worry about switches blocking your RGB. The fully invisible housings ensure 100% RGB shine-through. Lasts Several Lifetimes: Due to the intangible nature of these switches. They are guaranteed to last at least several lifetimes. You’ll never need to purchase another switch again! Collectible Bottle and Sticker: Unfortunately, due to the manufacturing process we were not able to infuse the material into the bottle and stickers. Therefore, all Invisiblend Switches will come with a tangible collectible bottle and sticker! Switches are sold in packs of 10. Quantity 1 = 10 switches. Specifications: Intangible Silent Linear Top Housing: Invisiblend Bottom Housing: Invisiblend Stem: Invisiblend Invisiblend infused dual-stage spring 4.0mm travel 67g bottom out 5 pin (PCB Mount) UNLUBED from factory Collectible sticker included with all orders while supplies last Collectible milk bottle packaging available for ALL orders: We'll be including the bottle and sticker for every 10 switches Quantity 1 = 10 switches = 1 Bottle + 1 Sticker Quantity 2 = 20 switches = 2 Bottles + 2 Stickers etc
บันทึกการวิจัย
1. What this is
INVISIBLEND ("Invisiblend") is catalogued as a push-button / switch device from dangkeebs.
2. What we know
- Manufacturer: dangkeebs
- Category: push-button / switch device
- Part number / name: INVISIBLEND — Invisiblend
- dangkeebs — see the manufacturer's catalog for this part.
3. How to identify / order the exact part
The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the dangkeebs catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).
4. Data-quality note
This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged decoded-partial.
5. Sources
- dangkeebs product catalog — search "INVISIBLEND" / "Invisiblend"
แหล่งที่มา
- dangkeebs INVISIBLEND — distributor/catalog
ข้อมูลจำเพาะ
|
Device class
|
push-button
|
|
Enriched by
|
generic-fallback-2026-08-12
|
|
Pn status
|
decoded-partial
|
|
Product type
|
switches
|
|
Shopify id
|
8033578778845
|
|
Vendor
|
Dangkeebs
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
ขนาด
การแก้ไขปัญหา
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
ข้อมูลจำเพาะอย่างย่อ
- Device class
- push-button
- Enriched by
- generic-fallback-2026-08-12
- Pn status
- decoded-partial
- Product type
- switches
- Shopify id
- 8033578778845