7914S-1-024E

ใช้งานอยู่

Bourns 7914S-1-024E

Bourns 7914S-1-024E — Bourns 7914S-1-024E

ภาพซีรีส์: ผู้ขายใช้ภาพนี้สำหรับชิ้นส่วนอื่นอีก 11 ชิ้นด้วย ดังนั้นอาจไม่แสดงรุ่นที่แน่นอนนี้

Tactile Switches 4mm KEY SWITCH SMD Right Angle

บันทึกการวิจัย

1. What this is

7914S-1-024E ("Bourns 7914S-1-024E") is catalogued as a push-button / switch device from Bourns.

2. What we know

  • Manufacturer: Bourns
  • Category: push-button / switch device
  • Part number / name: 7914S-1-024E — Bourns 7914S-1-024E
  • Bourns — potentiometers, encoders, and circuit-protection components

3. How to identify / order the exact part

The full specifications for this part are not machine-decodable from the data we hold. To confirm the exact configuration (contacts, rating, colour, mounting, protocol), search the Bourns catalog for this part number on the manufacturer site or a distributor (DigiKey / Mouser / RS).

4. Data-quality note

This page is generated from the catalogued manufacturer, category, and product name. Per our keep-and-document policy we publish a page for every part we hold and state plainly what is known versus what needs verification, rather than deleting the row or inventing specs. Flagged needs-verification.

5. Sources

  • Bourns product catalog — search "7914S-1-024E" / "Bourns 7914S-1-024E"

แหล่งที่มา
  1. Bourns 7914S-1-024E — distributor/catalog

ข้อมูลจำเพาะ

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
56 Days
Mouser part number
652-7914S-1-024E
Pn status
needs-verification
Rohs status
RoHS Compliant

คู่มือการติดตั้งอย่างรวดเร็ว

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

ขนาด

การแก้ไขปัญหา

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

รูปภาพและแบบแปลน

รูปภาพ: mouser.com

สถานที่จำหน่าย

ข้อมูลจำเพาะอย่างย่อ

Device class
push-button
Enriched by
generic-fallback-2026-08-12
Lead time
56 Days
Mouser part number
652-7914S-1-024E
Pn status
needs-verification