800T-QBH2R

ใช้งานอยู่

Allen Bradley 800T-QBH2R Push Button

Allen-Bradley 800T-QBH2R — Allen Bradley 800T-QBH2R Push Button

Allen Bradley 800T-QBH2R Push Button The Allen Bradley 800T-QBH2R is a push button with a current rating of 10 Amps and a voltage rating of 12 to 130VAC/VDC. The 800T-QBH2R has a screw connection type and it features extended head without guard.

บันทึกการวิจัย

1. What this is

800T-QBH2R is a Allen-Bradley 800T 30.5mm command switch.

2. Part-number decode

  • Series: Allen-Bradley 800T
  • Type: command switch
  • Panel cutout: 30.5mm

3. Compatibility & ordering

Allen-Bradley (Rockwell) makes the 800-series command switches: 800T/800H/800P (30.5mm heavy-duty) and 800F (22mm IEC), modular operators with separate contact blocks. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Allen-Bradley series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • Allen-Bradley product catalog (rockwellautomation.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

แหล่งที่มา
  1. Allen-Bradley — 800T-QBH2R — rockwellautomation.com

ข้อมูลจำเพาะ

Device class
command switch
Enriched by
ab-decoder-2026-08-12
Manufacturer series
800T
Panel cutout
30.5mm
Pn status
decoded
Product type
Push Button
Series description
Allen-Bradley 800T 30.5mm heavy-duty command switch (pushbutton/selector/indicator/E-stop; NEMA 4/13). Modular operator + contact blocks
Shopify id
8349038412089
Vendor
Allen Bradley

คู่มือการติดตั้งอย่างรวดเร็ว

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

ขนาด

การแก้ไขปัญหา

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

รูปภาพและแบบแปลน

รูปภาพ: cdn.shopify.com

สถานที่จำหน่าย

ช่วงราคา

$168.74 — $168.74

from 1 seller in US dollars

ข้อมูลจำเพาะอย่างย่อ

Device class
command switch
Enriched by
ab-decoder-2026-08-12
Manufacturer series
800T
Panel cutout
30.5mm
Pn status
decoded