800F-PL54
ใช้งานอยู่800F Yellow Pilot Light 24V
Allen-Bradley 800F yellow LED indicator.
การใช้งานทั่วไป
Yellow warning indicator for AB panels. Completes the green/yellow/red status cluster. Wire to PLC alarm output for pre-fault warning indication.
ข้อมูลจำเพาะ
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Yellow
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
24V AC/DC
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
ขนาด
การแก้ไขปัญหา
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
สถานที่จำหน่าย
ช่วงราคา
$59.09 — $60.29
จาก 2 ผู้จัดจำหน่าย
ข้อมูลจำเพาะอย่างย่อ
- Certifications
- UL, CSA, CE
- Color
- Yellow
- Cutout Diameter
- 22mm
- Illumination
- Illuminated
- LED Voltage
- 24V AC/DC
สิ่งที่ผู้คนพูดถึง
“Yellow warning indicator for AB panels. Completes the green/yellow/red status cluster. Wire to PLC alarm output for pre-fault warning indication.”