MKS3-10B
ใช้งานอยู่22mm 3-Position Selector Switch 1NO+1NC
ABB MK series 3-position selector with spring return to center.
การใช้งานทั่วไป
Hand/Off/Auto selector for ABB pump panels. Spring return to center (Off) when released. 1NO+1NC give PLC both the selected direction and the inactive state.
ข้อมูลจำเพาะ
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Spring return to center
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
1NO+1NC
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
ขนาด
แผนภาพการเดินสายไฟฟ้า
การแก้ไขปัญหา
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
สถานที่จำหน่าย
ช่วงราคา
$35.65 — $66.34
จาก 2 ผู้จัดจำหน่าย
ข้อมูลจำเพาะอย่างย่อ
- Actuator Function
- Spring return to center
- Certifications
- UL, CSA, CE
- Contact Configuration
- 1NO+1NC
- Cutout Diameter
- 22mm
- IP Rating
- IP66
สิ่งที่ผู้คนพูดถึง
“Hand/Off/Auto selector for ABB pump panels. Spring return to center (Off) when released. 1NO+1NC give PLC both the selected direction and the inactive state.”