1SFA619100R1072
ใช้งานอยู่ABB CP1-10G-11 Green Pushbutton 1NO+1NC
ABB CP series complete push button — compact one-piece design.
การใช้งานทั่วไป
ABBs latest compact complete button. Single part number, fully assembled. Designed for high-density panels where space between buttons is minimal. Slimmer profile than the MP series.
Research Notes
1. Overview
The ABB CP1-10G-11 (order code 1SFA619100R1072) is a 22 mm compact pushbutton from ABB's CP1 "Compact" series — a complete unit combining actuator, holder, and contact block. This variant is green, flush (non-protruding) actuator, momentary, non-illuminated, with a 1 NO + 1 NC contact block. It's a general-purpose panel pushbutton for machine and control-panel start/function duty, rated to IP66. (Data-quality note: this was cataloged as "CP1-10G-01 / 1NO"; the correct type for PN 1SFA619100R1072 is CP1-10G-11 with 1NO+1NC — the trailing "11" denotes the contact configuration.)
2. User Sentiment
The CP1 Compact line is valued for being an inexpensive, all-in-one 22 mm pushbutton (no separate contact block to order) that's quick to panel-mount and reliable for general control duty. ABB build quality and broad distributor stock (Mouser/Newark/RS) are pluses. As a compact plastic-bezel button it's specified for standard control panels rather than heavy-duty metal environments.
3. Real-World Applications
Start / function / control pushbutton on machinery and control panels; green typically denotes "start/on/run." The 1NO+1NC block lets it both energize one circuit and interrupt another (or drive a PLC input plus an indicator) from a single press.
4. Technical Specifications
- Type: ABB CP1 Compact complete pushbutton, 22 mm
- Order code: 1SFA619100R1072 → CP1-10G-11
- Actuator: flush, momentary, non-illuminated
- Color: green
- Contacts: 1 NO + 1 NC
- Cutout: 22 mm
- Sealing: IP66
- Approvals: UL, CSA, CE
5. Ordering & Compatibility
Stocked by Mouser, Newark/element14, RS, and ABB distributors. Fits standard 22 mm panel cutouts. Related CP1-10G codes differ only by contacts: -10 = 1 NO, -01 = 1 NC, -11 = 1 NO + 1 NC (this part). Color letter (G = green) and actuator style define the rest of the family.
6. Known Issues
No notable reliability issues — a standard ABB compact pushbutton. Practical care points: match the contact configuration (this is 1NO+1NC, not 1NO), confirm the 22 mm cutout, and note it's a compact plastic-bezel unit (choose ABB's metal MC series for heavy-duty/vandal environments).
2 sources
- ABB CP1-10G-11 Pushbutton (1SFA619100R1072) — new.abb.com
- ABB 1SFA619100R1072 compact pushbutton 1NO 1NC flush green — mouser.com
ข้อมูลจำเพาะ
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Green
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
1NO + 1NC
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Pn note
|
Order code 1SFA619100R1072 = CP1-10G-11 (1NO+1NC). Previously mislabeled CP1-10G-01/1NO; trailing 11 = contact config.
|
|
Type designation
|
CP1-10G-11
|
คู่มือการติดตั้งอย่างรวดเร็ว
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
ขนาด
แผนภาพการเดินสายไฟฟ้า
การแก้ไขปัญหา
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
สถานที่จำหน่าย
ช่วงราคา
$100.83 — $151.39
จาก 2 ผู้จัดจำหน่าย
ข้อมูลจำเพาะอย่างย่อ
- Actuator Function
- Momentary
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE
- Color
- Green
- Contact Configuration
- 1NO + 1NC
สิ่งที่ผู้คนพูดถึง
“ABBs latest compact complete button. Single part number, fully assembled. Designed for high-density panels where space between buttons is minimal. Slimmer profile than the MP series.”