A22-FK-10M
В производстве22mm Black Flush Push Button Omron 1NO
Omron A22 black push button.
Типичные применения
Black for auxiliary non-safety functions. Budget Omron pricing.
Research Notes
1. Overview
The Omron A22-FK-10M is a 22 mm flush (flat) pushbutton from Omron's A22 cylindrical (22/25-dia) pushbutton series — black, non-illuminated, momentary, with a 1 NO contact. In the A22 model code, the suffix -10M specifies the contact/operation (1 NO, momentary), so it's supplied as a unitized operator + switch. It's a general-purpose industrial panel pushbutton (IP65) with Omron's easy mount/wire design.
2. User Sentiment
The Omron A22 line is a long-standing, reliable industrial pushbutton family — valued for solid build, easy switch-unit mounting/removal, and broad availability. As a black flush momentary button it's a neutral general-function control. Practical points: confirm the contact/operation code (here 1 NO momentary) and the color code from the exact model number, and note the newer A22N series is the modular successor (operator + separate switch unit).
3. Real-World Applications
General-purpose black (neutral/function) flush momentary button on machine and control panels — start/function/general control wired through the 1 NO contact.
4. Technical Specifications
- Type: Omron A22 flush (flat) pushbutton, 22 mm, momentary
- Color: black (confirm A22 color letter vs catalog)
- Contact/operation: 1 NO, momentary (per the "-10M" suffix)
- Cutout: 22 mm
- Sealing: IP65
- Approvals: UL, CE
5. Ordering & Compatibility
Fits standard 22 mm cutouts. The A22 model code carries color + contact/operation (e.g. -FR- = red, -10M = 1 NO momentary). Related: illuminated A22 variants, e-stop A22E, and the modular A22N successor series. Confirm color and contact from the exact catalog number.
6. Known Issues
No notable reliability issues — a mainstream Omron pushbutton. Practical care: verify the contact/operation (1 NO momentary here) and color from the exact model, confirm the 22 mm cutout, and note the A22 (unitized) vs A22N (modular) distinction when sourcing service parts.
2 sources
- Omron A22 22mm pushbutton switch series — omron.com
- Omron A22-FK-10M black flush pushbutton 1NO momentary — mouser.com
Характеристики
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Black
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO momentary (per -10M suffix)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Omron A22 flush (flat) pushbutton, unitized (contact in model code)
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Series note
|
A22 (unitized); modular successor = A22N
|
Краткое руководство по монтажу
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Габаритные размеры
Схема подключения
Устранение неисправностей
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Где купить
Диапазон цен
$20.12 — $24.78
у 2 дистрибьюторов
Краткие характеристики
- Actuator Type
- Flush
- Certifications
- UL, CE
- Color
- Black
- Contact Configuration
- 1NO momentary (per -10M suffix)
- Cutout Diameter
- 22mm
Что говорят пользователи
“Black for auxiliary non-safety functions. Budget Omron pricing.”