Industrias Lorenzo RGB LED Concave Arcade Pushbutton with a 4 pin connector included compatible with the PacLED64 and I-PAC Ultimate I/O encoders.
Характеристики
|
Arcade express id
|
421
|
|
Weight kg
|
0.030000
|
Краткое руководство по монтажу
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Габаритные размеры
Устранение неисправностей
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Краткие характеристики
- Arcade express id
- 421
- Weight kg
- 0.030000
