82-601-84

В производстве

Grayhill 82-601-84

Grayhill 82-601-84 — Grayhill 82-601-84

Изображение серии: продавец использует её для 10 других деталей, поэтому она может не показывать именно эту версию.

Pushbutton Switches Keypad, 4PST, 6 button, unlighted gray, for legend inserts

Исследовательские заметки

1. What this is

82-601-84 is a Grayhill rotary/DIP switch.

2. Part-number decode

  • Series: Grayhill rotary/DIP
  • Type: rotary/DIP switch

3. Compatibility & ordering

Grayhill makes rotary switches, DIP switches, keypads, and optical encoders. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Grayhill product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Grayhill product catalog (grayhill.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Источник
  1. Grayhill — 82-601-84 — grayhill.com

Характеристики

Device class
rotary/DIP switch
Enriched by
grayhill-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
rotary/DIP
Mouser part number
706-82-601-84
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
Grayhill rotary or DIP configuration switch (82/26/56-series)

Краткое руководство по монтажу

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Габаритные размеры

Устранение неисправностей

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Фотографии и чертежи

Изображения: mouser.com

Краткие характеристики

Device class
rotary/DIP switch
Enriched by
grayhill-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
rotary/DIP
Mouser part number
706-82-601-84