INK SWITCHES V2

В производстве

Gateron Ink Switches V2

Gateron INK SWITCHES V2 — Gateron Ink Switches V2

Gateron Ink Switch V2 features upgraded contact leaves to prevent fallout. Gateron Ink Black has turned this linear switch to a classic. From Ink Black, Yellow, Red, Silent Black or Blue, it encompasses a wide variety of switches for all enthusiasts.  Gateron Ink V2 Switches Feature: 18 included in each pack MX Switch 5 pin Gateron Ink Black V2 Linear Actuation: 60g Bottom: 70g Travel: 4.0mm Price: $0.72 per switch Gateron Ink Silent Black Silent Linear Actuation: 60g Bottom: 70g Travel: 4.0mm Price: $0.83 per switch Includes: 18 Gateron Ink V2 Switches

Исследовательские заметки

1. What this is

Gateron Ink Switches V2 is a mechanical keyboard switch from Gateron.

2. Spec decode (from product name)

  • Type/force not stated in the product name — see the manufacturer spec.

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

This is identified as a Gateron keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

  • Gateron product page / keyboard-switch community databases
  • Distributor / vendor listing — search the exact switch name

Источник
  1. Gateron Gateron Ink Switches V2 — keyboard-switch spec

Характеристики

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
needs-verification
Product type
Switches
Series description
Gateron mechanical keyboard switch
Shopify id
4531821051969
Vendor
Gateron

Краткое руководство по монтажу

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Габаритные размеры

Устранение неисправностей

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Фотографии и чертежи

Изображения: cdn.shopify.com

Где купить

Диапазон цен

$14.95 — $14.95

from 1 seller in US dollars

Краткие характеристики

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
needs-verification
Product type
Switches
Series description
Gateron mechanical keyboard switch