10935H12A

В производстве

Eaton 10935H12A Push Button

Eaton 10935H12A — Eaton 10935H12A Push Button

Eaton 10935H12A Push Button The Eaton 10935H12A is a push button.

Исследовательские заметки

1. What this is

10935H12A is an Eaton Cutler-Hammer 10935H 30.5mm heavy-duty control component.

2. Part-number decode

  • Series: 10935H (Cutler-Hammer)
  • Panel cutout: 30.5mm

3. Compatibility & ordering

Eaton's M22 (RMQ-Titan, 22mm) and E30 / 10250T (30.5mm heavy-duty) are its principal command-switch ranges. This is a complete/integrated device. Match by size (22 / 30.5mm), function (pushbutton/selector/indicator/E-stop), color, illumination, and contact arrangement; cross-reference to Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, or IDEC HW by the same attributes if needed.

4. Data-quality note

The exact Eaton series/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Eaton control-components catalog (Vol.7) / RMQ-Titan M22 & 10250T (eaton.com)
  • Distributor listing (Newark / Mouser) — search the exact part number

Источник
  1. Eaton — 10935H12A — eaton.com

Характеристики

Enriched by
eaton-decoder-2026-08-12
Manufacturer series
10935H (Cutler-Hammer)
Mouser checked
2026-09-28
Mouser matched
false
Panel cutout
30.5mm
Pn status
needs-verification
Product type
Push Button
Series description
Eaton Cutler-Hammer 10935H 30.5mm heavy-duty control component
Shopify id
8347105820985
Vendor
Eaton

Краткое руководство по монтажу

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Габаритные размеры

Устранение неисправностей

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Фотографии и чертежи

Изображения: cdn.shopify.com

Где купить

Диапазон цен

$25.54 — $25.54

from 1 seller in US dollars

Краткие характеристики

Enriched by
eaton-decoder-2026-08-12
Manufacturer series
10935H (Cutler-Hammer)
Mouser checked
2026-09-28
Mouser matched
false
Panel cutout
30.5mm