Pushbutton Switches Pushbutton, DPST , Off-On, Panel Mount, Snap-In, Red/Green, I/O Vertical, IP54
Research Notes
1. What this is
KJD17-22413-112 is an E-Switch KJD-series appliance/paddle switch.
2. Part-number decode
- Series: E-Switch KJD
- Type: appliance switch
3. Compatibility & ordering
E-Switch makes tactile, pushbutton (incl. anti-vandal/illuminated), toggle, slide, and appliance switches for electronics and industrial controls. Match by type, actuation (momentary/maintained), illumination, sealing, and mounting, then use the E-Switch datasheet to confirm the exact contact form and termination encoded in the part number.
4. Data-quality note
The E-Switch product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- E-Switch product catalog (e-switch.com)
- Distributor listing (DigiKey / Mouser) — search the exact part number
1 source
- E-Switch — KJD17-22413-112 — e-switch.com
Характеристики
|
Device class
|
appliance switch
|
|
Enriched by
|
eswitch-decoder-2026-08-12
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
KJD
|
|
Mouser part number
|
612-KJD17-22413-112
|
|
Pn status
|
decoded-partial
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
E-Switch KJD-series appliance / power-tool paddle & safety switch (on/off paddle switch used in tools and machinery)
|
Краткое руководство по монтажу
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Габаритные размеры
Устранение неисправностей
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Краткие характеристики
- Device class
- appliance switch
- Enriched by
- eswitch-decoder-2026-08-12
- Lead time
- 0 Days
- Manufacturer series
- KJD
- Mouser part number
- 612-KJD17-22413-112
