9001BW92Y

Activ

Square D 9001BW92Y Pendant Station

Square D 9001BW92Y — Square D 9001BW92Y Pendant Station

Square D 9001BW92Y Pendant Station The Square D 9001BW92Y is a pendant station with a current rating of 5 Amps and a voltage rating of 600VAC. It features with a maintained/momentary action. The 9001BW92Y has a contact configuration of 2NO.

Note de Cercetare

1. What this is

9001BW92Y is a Square D 9001 command device.

2. Part-number decode

  • Series: Square D 9001
  • Type: command switch
  • Panel cutout: 30.5mm

3. Compatibility & ordering

Square D (Schneider's US brand) makes the Class 9001 30mm heavy-duty command switches and Harmony devices. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Square D product line/type is identified; the detailed configuration is left to the datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Square D product catalog (se.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Sursă
  1. Square D — 9001BW92Y — se.com

Specificații

Device class
command switch
Enriched by
squared-decoder-2026-08-12
Manufacturer series
9001
Panel cutout
30.5mm
Pn status
decoded-partial
Product type
Pendant Station
Series description
Square D Class 9001 30mm command device / accessory
Shopify id
8346459898169
Vendor
Square D

Referință rapidă de instalare

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiuni

Depanare

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotografii și Desene

Imagini: cdn.shopify.com

De unde cumpărați

Interval de preț

$145.0 — $145.0

from 1 seller in US dollars

Specificații rapide

Device class
command switch
Enriched by
squared-decoder-2026-08-12
Manufacturer series
9001
Panel cutout
30.5mm
Pn status
decoded-partial