XACA215
ActivSchneider Electric XACA215 Pendant Control Station
Schneider Electric XACA215 Pendant Control Station The Schneider Electric XACA215 is a pendant control station with a current rating of 10 Amps and a voltage rating of 600VAC. It has a panel mounting type. The XACA215 has a screw clamp terminal connection.
Note de Cercetare
1. What this is
XACA215 is a Schneider Electric Harmony XAC control-station enclosure / pendant component.
2. Part-number decode
- Series: Harmony XAC
- Type: station enclosure
3. Compatibility & ordering
Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.
4. Data-quality note
The Schneider series/family is identified; bezel/size are indicative and the exact colour/contact configuration is left to the Schneider datasheet rather than guessed. Flagged decoded-partial.
5. Sources
- Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
- Distributor listing (Rexel / Mouser / Newark) — search the exact part number
Sursă
- Schneider Electric — XACA215 — se.com
Specificații
|
Component type
|
station enclosure
|
|
Enriched by
|
schneider-decoder-2026-08-12
|
|
Manufacturer series
|
Harmony XAC
|
|
Pn status
|
decoded-partial
|
|
Product type
|
Pendant Control Station
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
Harmony / Square D Class 9001
|
|
Series description
|
Schneider Harmony XAC control-station enclosure / pendant component
|
|
Shopify id
|
8347417477433
|
|
Vendor
|
Schneider Electric
|
Referință rapidă de instalare
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensiuni
Depanare
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
De unde cumpărați
Interval de preț
$154.07 — $154.07
from 1 seller in US dollars
Specificații rapide
- Component type
- station enclosure
- Enriched by
- schneider-decoder-2026-08-12
- Manufacturer series
- Harmony XAC
- Pn status
- decoded-partial
- Product type
- Pendant Control Station
Aflați mai multe
Explicarea gradelor de protecție IP
Ce înseamnă IP65, IP66, IP67, IP69K pentru aplicația dvs.
Ghid 22mm vs 30mm
Ce dimensiune de decupaj în panou aveți nevoie?
Blocuri de contacte: NO vs NC
Cum alegeți și conectați blocurile de contacte
Instrument de căutare butoane
Găsiți butonul potrivit după tip, dimensiune și culoare