9001BW72R

Activ

Schneider Electric 9001BW72R Push Button Pendant Station

Schneider Electric 9001BW72R Push Button Pendant Station The Schneider Electric 9001BW72R is a push button pendant station with a current rating of 5 Amps and a voltage rating of 600VAC. It has a surface mounting type. The 9001BW72R has a up-down momentary action.

Note de Cercetare

1. What this is

9001BW72R is a Schneider Electric Class 9001B 30mm pushbutton control / pendant station (US-style 30.5mm enclosed station).

2. Part-number decode

  • Series: Square D 9001B
  • Panel cutout: 30.5mm
  • Bezel material: Metal
  • Type: control station

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series/family is identified; bezel/size are indicative and the exact colour/contact configuration is left to the Schneider datasheet rather than guessed. Flagged decoded-partial.

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

Sursă
  1. Schneider Electric — 9001BW72R — se.com

Specificații

Bezel material
metal
Component type
control station
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Square D 9001B
Panel cutout
30.5mm
Pn status
decoded-partial
Product type
Push Button Pendant Station
Wireless Range
Harmony / Square D Class 9001
Series description
Square D Class 9001B 30mm pushbutton control / pendant station (US-style 30.5mm enclosed station)
Shopify id
8346595754297
Vendor
Schneider Electric

Referință rapidă de instalare

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiuni

Depanare

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

De unde cumpărați

Interval de preț

$66.82 — $66.82

from 1 seller in US dollars

Specificații rapide

Bezel material
metal
Component type
control station
Enriched by
schneider-decoder-2026-08-12
Manufacturer series
Square D 9001B
Panel cutout
30.5mm