HW1B-V5F22-R

Activ

IDEC HW1B-V5F22-R

Număr de catalog: HW1B - R
IDEC HW1B-V5F22-R — IDEC HW1B-V5F22-R

Imagine a seriei: vânzătorul o folosește pentru 131 alte piese, deci este posibil să nu arate această versiune exactă.

Emergency Stop Switches / E-Stop Switches 22mm Emergency-Stop

Note de Cercetare

1. What this is

HW1B-V5F22-R is an IDEC HW-series 22mm heavy-duty IEC-style global pushbutton (finger-safe IP20 contact blocks, push-in terminals; HW4 = square bezel). This specific variant is Red, 2NO-2NC.

2. Part-number decode

  • Series: IDEC HW — 22mm pushbutton
  • Contacts: 2NO-2NC
  • Color: Red
  • Construction: modular — sold as a sub-assembled unit (operator + contact block + button); contact blocks are separate stackable parts

3. Compatibility & ordering

Panel cutout: 22mm. As a modular IEC command switch, the operator, contact block(s), and button/lens are separate stackable parts — match the contact arrangement to your circuit and add or swap contact blocks as needed. Cross-reference by size, operation, contact arrangement, and color to an equivalent from another IEC command-switch line (Schneider Harmony, Allen-Bradley 800F/800T, Siemens 3SU, Eaton M22) if IDEC is unavailable.

4. Data-quality note

This page is generated by decoding IDEC's published part-number scheme for the HW series (grounded in IDEC's series datasheets and IDEC USA's catalog). The structured fields above follow directly from the code.

5. Sources

  • IDEC HW-series datasheet / ordering guide (idec.com)
  • IDEC USA catalog: https://us.idec.com (search the exact part number)

Sursă
  1. IDEC USA catalog — HW1B-V5F22-R — us.idec.com

Specificații

Color
Red
Contact arrangement
2NO-2NC
Device class
pushbutton
Enriched by
idec-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
HW
Modular
true
Mouser part number
199-HW1BV5F22R
Panel cutout
22mm
Pn status
decoded
Rohs status
Series description
IDEC HW-series 22mm heavy-duty IEC-style global pushbutton (finger-safe IP20 contact blocks, push-in terminals; HW4 = square bezel)

Referință rapidă de instalare

Panel cutout: 22mm. Mount with the yellow backing plate visible (required by EN/ISO 13850).

Wiring: Wire NC contacts in series with the safety relay input channels. Use dual-channel wiring for SIL 3 / PLe applications. Never wire directly to a motor contactor.

Testing: Press the e-stop and verify the machine stops within the required time. Test the reset mechanism. Repeat monthly per EN/ISO 13850.

Dimensiuni

Depanare

E-stop won't reset (twist/pull doesn't release)

Check for debris in the mechanism. For twist-release: turn clockwise 45-90 degrees. For push-pull: pull straight out firmly. If the mechanism is stuck, the internal latch may be damaged — replace the entire head assembly.

Machine doesn't stop when e-stop is pressed

Critical safety issue. Immediately lock out the machine. Check wiring — NC contacts must be in series with the safety relay. Verify the safety relay is functioning. A broken wire in an NC circuit should cause a stop, so check for a wiring bypass.

Safety relay faults after e-stop reset

The safety relay detects a cross-fault between the two monitoring channels. Check that both NC contacts on the e-stop are switching simultaneously. One contact may be welded closed — replace the contact block.

Fotografii și Desene

Imagini: mouser.com

Specificații rapide

Color
Red
Contact arrangement
2NO-2NC
Device class
pushbutton
Enriched by
idec-decoder-2026-08-12
Lead time
0 Days