10-100

Activ

Grayhill 10-100

Grayhill 10-100 — Grayhill 10-100

Imagine a seriei: vânzătorul o folosește pentru 2 alte piese, deci este posibil să nu arate această versiune exactă.

Pushbutton Switches SPST NO Red Button Positive feel

Note de Cercetare

1. What this is

10-100 is a Grayhill switch.

2. Part-number decode

  • Series: Grayhill switch/component
  • Type: switch

3. Compatibility & ordering

Grayhill makes rotary switches, DIP switches, keypads, and optical encoders. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The exact Grayhill product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Grayhill product catalog (grayhill.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Sursă
  1. Grayhill — 10-100 — grayhill.com

Specificații

Device class
switch
Enriched by
grayhill-decoder-2026-08-12
Lead time
112 Days
Manufacturer series
switch/component
Mouser part number
706-10-100
Pn status
needs-verification
Rohs status
RoHS Compliant
Series description
Grayhill switch / component (type per datasheet)

Referință rapidă de instalare

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiuni

Depanare

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotografii și Desene

Imagini: mouser.com

Specificații rapide

Device class
switch
Enriched by
grayhill-decoder-2026-08-12
Lead time
112 Days
Manufacturer series
switch/component
Mouser part number
706-10-100