800FMF2

Activ

Allen-Bradley 800FMF2 Push Button

Allen-Bradley 800FMF2 — Allen-Bradley 800FMF2 Push Button

Allen-Bradley 800FMF2 Push Button The Allen-Bradley 800FMF2 is a push button features with a size of 22.5mm. It has a flush operator.

Note de Cercetare

1. What this is

800FMF2 is a Allen-Bradley 800F 22mm command switch.

2. Part-number decode

  • Series: Allen-Bradley 800F
  • Type: command switch
  • Panel cutout: 22mm

3. Compatibility & ordering

Allen-Bradley (Rockwell) makes the 800-series command switches: 800T/800H/800P (30.5mm heavy-duty) and 800F (22mm IEC), modular operators with separate contact blocks. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The Allen-Bradley series and switch type are decoded from the part number (grounded in the manufacturer catalog and distributor listings). The exact contact arrangement, termination, and cap/colour are encoded in the full order code — confirm against the datasheet for a precise order (not guessed here).

5. Sources

  • Allen-Bradley product catalog (rockwellautomation.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Sursă
  1. Allen-Bradley — 800FMF2 — rockwellautomation.com

Specificații

Device class
command switch
Enriched by
ab-decoder-2026-08-12
Manufacturer series
800F
Panel cutout
22mm
Pn status
decoded
Product type
Push Button
Series description
Allen-Bradley 800F 22mm IEC command switch (modular operators + contact/latch blocks; the 800F 'stations' pattern was a curated-loop fabrication flag)
Shopify id
8345321242937
Vendor
Allen-Bradley

Referință rapidă de instalare

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiuni

Depanare

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotografii și Desene

Imagini: cdn.shopify.com

De unde cumpărați

Interval de preț

$8.75 — $8.75

from 1 seller in US dollars

Specificații rapide

Device class
command switch
Enriched by
ab-decoder-2026-08-12
Manufacturer series
800F
Panel cutout
22mm
Pn status
decoded