609-AEW

Activ

Allen Bradley 609-AEW Starting Switch

Allen-Bradley 609-AEW — Allen Bradley 609-AEW Starting Switch

Allen Bradley 609AEW Manual Starting Switch The Allen Bradley 609AEW is a manual starting switch features with a push button operator type.

Note de Cercetare

1. What this is

609-AEW is a Allen-Bradley manual starter/switch.

2. Part-number decode

  • Series: Allen-Bradley 600/609 (manual starter)
  • Type: manual starter/switch

3. Compatibility & ordering

Allen-Bradley (Rockwell) makes the 800-series command switches: 800T/800H/800P (30.5mm heavy-duty) and 800F (22mm IEC), modular operators with separate contact blocks. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The exact Allen-Bradley product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • Allen-Bradley product catalog (rockwellautomation.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Sursă
  1. Allen-Bradley — 609-AEW — rockwellautomation.com

Specificații

Device class
manual starter/switch
Enriched by
ab-decoder-2026-08-12
Manufacturer series
600/609 (manual starter)
Mouser checked
2026-09-28
Mouser matched
false
Pn status
needs-verification
Product type
Starting Switch
Series description
Allen-Bradley 600/609-series manual motor starter / switch
Shopify id
8345270354233
Vendor
Allen Bradley

Referință rapidă de instalare

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiuni

Depanare

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotografii și Desene

Imagini: cdn.shopify.com

De unde cumpărați

Interval de preț

$1509.84 — $1509.84

from 1 seller in US dollars

Specificații rapide

Device class
manual starter/switch
Enriched by
ab-decoder-2026-08-12
Manufacturer series
600/609 (manual starter)
Mouser checked
2026-09-28
Mouser matched
false