CEPY1-2001

Activ

ABB CEPY1-2001

ABB CEPY1-2001 — ABB CEPY1-2001

Push-button Enclosures CP,ENCL,YEL,SH, P-P40MM RED 2NC

Note de Cercetare

1. What this is

CEPY1-2001 is a ABB ABB device — line not recognized.

2. Part-number decode

  • Series: ABB ABB (line not recognized)
  • Type: command switch

3. Compatibility & ordering

ABB makes Modular (MP metal / CP plastic) 22mm command switches, CE compact switches, KP mushroom operators, and Jokab (2TLA) safety products. Match by type, actuation, illumination, sealing, and mounting, then use the manufacturer datasheet to confirm the exact contact and termination encoded in the part number.

4. Data-quality note

The exact ABB product line/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification.

5. Sources

  • ABB product catalog (abb.com)
  • Distributor listing (DigiKey / Mouser) — search the exact part number

Sursă
  1. ABB — CEPY1-2001 — abb.com

Specificații

Enriched by
abb-decoder-2026-08-12
Lead time
49 Days
Manufacturer series
ABB (line not recognized)
Mouser part number
894-CEPY1-2001
Pn status
needs-verification
Rohs status
Series description
ABB control device — exact series/config could not be decoded from this part number; kept and flagged for verification

Referință rapidă de instalare

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiuni

Depanare

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotografii și Desene

Imagini: mouser.com

Specificații rapide

Enriched by
abb-decoder-2026-08-12
Lead time
49 Days
Manufacturer series
ABB (line not recognized)
Mouser part number
894-CEPY1-2001
Pn status
needs-verification