JING LINEAR

Activ

43 Studio Jing Linear Switches

43 Studio JING LINEAR — 43 Studio Jing Linear Switches

43 Studio Jing Switches are linear switches with a custom Nylon blend housing and P3 extended stem for a reduced travel, pole bottom-out. Also featuring ThicThock DL V2 springs. 43 Studio Jing Switches Feature: 18 included in each pack Linear Top Housing: Custom Nylon Blend Bottom Housing: Custom Nylon Blend Stem: P3 Total Travel: 3.7 ± 0.2mm Actuation Force: 52g Bottom-Out Force: 62g Spring: ThicThock DL V2, 16.5mm 5-Pin, PCB Mount MX Structure Lubed Price: $0.20 per switch Includes: 18 43 Studio Jing Switches Final Sale: This item is on clearance and will be ineligible for returns.

Note de Cercetare

1. What this is

43 Studio Jing Linear Switches is a mechanical keyboard switch from 43 Studio. It is linear.

2. Spec decode (from product name)

  • Switch type: linear

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

  • 43 Studio product page / keyboard-switch community databases
  • Distributor / vendor listing — search the exact switch name

Sursă
  1. 43 Studio 43 Studio Jing Linear Switches — keyboard-switch spec

Specificații

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
decoded-partial
Product type
Switches
Series description
43 Studio mechanical keyboard switch (linear)
Shopify id
7076260872257
Switch type
linear
Vendor
43 Studio

Referință rapidă de instalare

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiuni

Depanare

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotografii și Desene

Imagini: cdn.shopify.com

De unde cumpărați

Interval de preț

$3.95 — $3.95

from 1 seller in US dollars

Specificații rapide

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
decoded-partial
Product type
Switches
Series description
43 Studio mechanical keyboard switch (linear)