XACA0661
ActiveSchneider Harmony XAC (XACA06) Empty 6-Cutout Pendant Enclosure
Schneider Harmony XACA 6-button pendant control station.
Common Applications
Schneiders crane pendant competing with Giovenzana PLB. Uses standard XB4/XB5 contact blocks inside. Yellow IP65 housing. 6 momentary buttons for crane bridge and trolley control. Schneider pendants are more common in countries where Schneider dominates the industrial controls market (France, Middle East, Southeast Asia).
Research Notes
1. Overview
The Schneider Electric Harmony XAC pendant station in the XACA06 configuration is an empty pendant control enclosure with 6 cut-outs (in one vertical column) for customer-supplied 22 mm pushbuttons/devices. It is a robust polycarbonate hanging box used to build crane/hoist/machine pendant controls — you add your own 22 mm Harmony buttons, E-stop, and contact blocks. It is rated IP65, CE/UL, medium-duty. (Data-quality note: this entry was stored as a populated "6-Button, 6× 1 NO" station — but XACA06 ships empty (no buttons or contacts). Also, the exact part code "XACA0661" is not independently verifiable; the confirmed Schneider part for a 6-hole empty XAC pendant is XACA06.)
2. User Sentiment
Harmony XAC pendant enclosures are a trusted, robust, ergonomic choice for building custom pendant controls — praised for durability and flexibility (fit whatever 22 mm devices the application needs). The trade-off vs. a pre-assembled pendant is that you must populate it yourself (buttons, E-stop, contacts, cable gland, strain relief), so the "6× 1 NO contacts" a populated station would have are not part of this SKU.
3. Real-World Applications
Building custom pendant control stations for overhead cranes, hoists, and machinery — the installer fits 6 Harmony 22 mm devices (e.g. up/down, left/right, plus auxiliaries or an E-stop) into the enclosure and wires the contact blocks.
4. Technical Specifications
- Type: Empty pendant control enclosure (hanging), Harmony XAC
- Cut-outs: 6 (one vertical column), for 22 mm devices
- Contents: enclosure only — no buttons/contacts included
- Housing: polycarbonate, yellow
- Sealing: IP65
- Duty/approvals: medium-duty; CE, UL
- Verified base part: XACA06 (the "XACA0661" suffix is unverified)
5. Ordering & Compatibility
Order the empty XACA06 enclosure plus the required 22 mm Harmony pushbuttons/E-stop and contact blocks separately, along with a cable gland and strain relief. Fits standard 22 mm Harmony XB/ZB devices. Schneider also offers other XAC hole-counts/columns (e.g. XACA12 = 12 openings) and pre-assembled XAC pendant stations under different part numbers.
6. Known Issues / DQ
- DQ: this is an empty enclosure, not a populated 6-button station — the previously stored "6× 1 NO" contact set is incorrect for XACA06. The specific PN "XACA0661" could not be verified against Schneider/distributor catalogs (verified base part is XACA06).
- Practical care: when populating, include an emergency stop for crane/hoist duty, ensure proper strain relief (pendants take mechanical load), and match contact blocks to the chosen devices.
2 sources
- XACA06 — Empty pendant control station, 6 cut-outs — se.com
- XACA06 empty pendant box, 6 vertical holes — one-elec.com
Specifications
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, UL
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Yellow housing
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None — empty enclosure (6 cut-outs for customer 22mm devices; buttons/contacts not included)
|
|
Device type
|
Empty pendant control enclosure (populate with 22mm Harmony devices)
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Polycarbonate
|
|
Pn note
|
XACA06 = empty 6-cutout pendant enclosure (se.com/Mouser/Newark/one-elec: no buttons/contacts). Stored 6x 1NO was fabricated. Exact PN XACA0661 not independently verifiable; verified base part is XACA06.
|
|
Pn status
|
empty-enclosure + pn-unverified
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Wiring Diagram
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$18.15 — $164.11
across 2 sellers in US dollars
Quick Specs
- Certifications
- CE, UL
- Color
- Yellow housing
- Contact Configuration
- None — empty enclosure (6 cut-outs for customer 22mm devices; buttons/contacts not included)
- Device type
- Empty pendant control enclosure (populate with 22mm Harmony devices)
- IP Rating
- IP65
What People Are Saying
“Schneiders crane pendant competing with Giovenzana PLB. Uses standard XB4/XB5 contact blocks inside. Yellow IP65 housing. 6 momentary buttons for crane bridge and trolley control. Schneider pendants a”