MP1-10K
ActiveABB MP1-10K Modular Black Flush Pushbutton Head (head-only)
ABB black flush push button.
Common Applications
Black for auxiliary functions. Counter reset, horn silence, lamp test.
Research Notes
1. Overview
The ABB MP1-10K is a 22 mm flush momentary pushbutton head (stored color black) from ABB's MP "Modular" (plastic) series — non-illuminated, black-plastic bezel. Like the rest of the ABB MP modular range it is a head/operator only: it needs a separate MCB contact block on an MCBH holder to function. (Data-quality notes: (1) the MP head has no integral contact — the stored "1 NO" is misattributed (same as MP1-10W #468 / MP3 #357/#358); (2) the color code "K" is non-standard for ABB — ABB's black code is MP1-10B (and L = blue, W = white, R/G/Y = red/green/yellow). Verify whether this is MP1-10B (black) or another code.)
2. User Sentiment
ABB's modular MP pushbuttons are valued for flexibility — pick the head and add exactly the contact blocks needed. The common ordering pitfall is that the head alone isn't a working button (add MCB/MCBH). Black is a neutral/general-function color.
3. Real-World Applications
A black (general-function) flush momentary button on machine/control panels — installer adds the required NO/NC contact block(s).
4. Technical Specifications
- Type: ABB MP Modular pushbutton head (head-only), 22 mm
- Actuator: flush, momentary; black; non-illuminated; black plastic bezel
- Contacts: none integral — add ABB MCB contact block on MCBH holder
- Cutout: 22 mm
- Sealing: IP66
- Approvals: UL, CSA, CE
- Code note: black in ABB's scheme is MP1-10B ("K" non-standard — verify)
5. Ordering & Compatibility
Order the head plus the required MCB contact block(s) and MCBH holder — or use ABB's Compact CP1 series for a one-piece complete pushbutton. Fits standard 22 mm cutouts. Confirm the exact catalog code (MP1-10B for black) when ordering, since "MP1-10K" doesn't match ABB's standard color coding.
6. Known Issues / DQ
- DQ: (1) modular head — no integral contact (stored "1 NO" misattributed; corrected). (2) color code "K" is non-standard (ABB black = MP1-10B) — flagged to verify.
- Practical care: order the contact block + holder separately; confirm the 22 mm cutout and the correct color code; compact plastic-bezel head (metal series for heavy-duty).
2 sources
Specifications
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Black
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None integral (head-only; add ABB MCB contact block + MCBH holder)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
ABB MP Modular pushbutton HEAD (non-illuminated, black flush)
|
|
Pn note
|
MP series is head-only (MCB block + MCBH holder separate); stored 1NO misattributed (cf MP1-10W #468, MP3 #357/358). Also: ABB color code K is non-standard — black = MP1-10B; verify exact code.
|
|
Pn status
|
head-only-corrected + color-code-to-verify
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Wiring Diagram
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$16.21 — $25.14
across 2 sellers in US dollars
Quick Specs
- Actuator Type
- Flush
- Certifications
- UL, CSA, CE
- Color
- Black
- Contact Configuration
- None integral (head-only; add ABB MCB contact block + MCBH holder)
- Cutout Diameter
- 22mm
What People Are Saying
“Black for auxiliary functions. Counter reset, horn silence, lamp test.”