8LM2TB104
ActiveLovato 8LM2TB104 Red Flush Pushbutton Actuator (8LM Platinum, head-only)
Lovato 8LM red push button.
Common Applications
Italian red stop button. Same 22mm standard.
Research Notes
1. Overview
The Lovato Electric 8LM2TB104 is a 22 mm red flush pushbutton actuator from Lovato's 8LM "Platinum" metal control-device series — spring-return (momentary), non-illuminated. Per Lovato's catalog it is a pushbutton actuator (operator head): in the 8LM modular system the actuator takes a separate contact element (e.g. 8LM2TC.. for NO/NC) on a holder. Red is the conventional stop/off color. (Data-quality note: this was cataloged with a "1 NC" contact — the 8LM actuator has no integral contact; the contact element is ordered separately. Same modular pattern as #477 (8LM green), ABB MP #468/#469, and Eaton M22 heads.)
2. User Sentiment
Lovato's 8LM Platinum line is a well-built, value European 22 mm system — metal bezels, broad modular selection, good availability. The flexibility (actuator + chosen contacts) is the plus; the common pitfall is that the actuator alone isn't a working button — add the contact element and holder. A red flush momentary suits a stop function (paired with an NC contact).
3. Real-World Applications
A red stop/off flush momentary button on machine and control panels — the installer adds an NC contact element to interrupt a circuit on press. (For a latching emergency stop, use a red mushroom e-stop, not this flush momentary actuator.)
4. Technical Specifications
- Type: Lovato 8LM Platinum pushbutton actuator (head), 22 mm, metal, flush
- Actuator: flush, spring-return (momentary); red; non-illuminated
- Contacts: none integral — add Lovato 8LM2TC contact element(s) + holder (e.g. 8LM2TC01 = 1 NC)
- Cutout: 22 mm
- Sealing: IP65 (assembled)
- Approvals: CE, UL
5. Ordering & Compatibility
Order the 8LM2TB104 actuator plus the required contact element(s) and holder. Fits standard 22 mm cutouts, 8LM Platinum system. Related 8LM actuators differ by color (03 = green #477, 04 = red); the plastic 8LM2M series is the economy line.
6. Known Issues / DQ
- DQ: it's a modular actuator (head) with no integral contact — the stored "1 NC" was misattributed. Corrected here (contact → separate 8LM2TC element).
- Practical care: order the contact element + holder separately; a flush momentary red button is not a latching emergency stop (use a red mushroom e-stop for safety-stop duty).
2 sources
- Lovato 8LM2TB104 pushbutton actuator, spring return, flush, red — lovatoelectric.com
- Lovato 8LM2TB104 red flush pushbutton actuator (8LM Platinum) — mouser.com
Specifications
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary; red = stop/off (add NC contact; NOT a latching e-stop)
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Flush
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE, UL
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
None integral (actuator/head-only; add Lovato 8LM2TC contact element, e.g. 8LM2TC01=1NC)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Lovato 8LM Platinum pushbutton ACTUATOR/head (metal, red flush, spring return)
|
|
IP Rating
IP65: Dust-tight and protected against low-pressure water jets. Suitable for indoor industrial and light washdown.
|
IP65
|
|
Pn note
|
Corrected: 8LM2TB104 = red flush ACTUATOR; 8LM modular, contact element separate. Stored 1NC misattributed (cf #477, ABB MP heads).
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Wiring Diagram
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$59.42 — $143.42
across 2 sellers in US dollars
Quick Specs
- Actuator Function
- Momentary; red = stop/off (add NC contact; NOT a latching e-stop)
- Actuator Type
- Flush
- Certifications
- CE, UL
- Color
- Red
- Contact Configuration
- None integral (actuator/head-only; add Lovato 8LM2TC contact element, e.g. 8LM2TC01=1NC)
What People Are Saying
“Italian red stop button. Same 22mm standard.”
Learn More
More from Lovato Electric
Lovato Electric
8LM2TB103
Lovato 8LM2TB103 Green Flush Pushbutton Actuator (8LM Platinum, head-only)
Lovato Electric
8LM2TB105
Lovato 8LM2TB105 Yellow Flush Pushbutton Actuator (8LM Platinum, head-only)
Lovato Electric
8LM2TB106
Lovato 8LM2TB106 Blue Flush Pushbutton Actuator (8LM Platinum, head-only)