Lovato Electric · 8LM Serie

8LM2TB104

Activo
CE UL

8LM 22mm Red Flush Push Button 1NC

Lovato Electric 8LM Serie Introduced circa 2010

Lovato 8LM red push button.

Aplicaciones comunes

Italian red stop button. Same 22mm standard.

Especificaciones

Actuator Type
Flush
Certifications
CE, UL
Color
Red
Contact Configuration
1NC
Cutout Diameter
22mm
IP Rating
IP65

Referencia rápida de instalación

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiones

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Diagrama de cableado

L T 21 22 NC (closed) opens on press

Solución de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Dónde comprar

Rango de precios

$59.42 — $143.42

en 2 distribuidores

Especificaciones rápidas

Actuator Type
Flush
Certifications
CE, UL
Color
Red
Contact Configuration
1NC
Cutout Diameter
22mm

Lo que dicen los usuarios

+

“Italian red stop button. Same 22mm standard.”

Reddit r/PLC 29 votos positivos Ver hilo →