WS Switch Series Specifications WS Red Top and bottom housing: Nylon POM linear stem Double stage spring: 67g Total travel: 3.80±0.3mm Pre-travel: 2.00±0.5mm Bottom-out force: 67g Factory lubed
Notas de Pesquisa
1. What this is
Wuque Studio WS Switch Series is a mechanical keyboard switch from Wuque Studio.
2. Spec decode (from product name)
- Type/force not stated in the product name — see the manufacturer spec.
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
This is identified as a Wuque Studio keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Wuque Studio product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Fonte
- Wuque Studio WS Switch Series — keyboard-switch spec
Especificações
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
needs-verification
|
|
Product type
|
Switches
|
|
Series description
|
Wuque Studio mechanical keyboard switch
|
|
Shopify id
|
7582884626602
|
|
Vendor
|
Wuque Studio
|
Referência rápida de instalação
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensões
Solução de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Onde comprar
Faixa de preço
$13.65 — $13.65
from 1 seller in US dollars
Especificações rápidas
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- needs-verification
- Product type
- Switches
- Series description
- Wuque Studio mechanical keyboard switch
Saiba mais
Graus de proteção IP explicados
O que IP65, IP66, IP67, IP69K significam para sua aplicação
Guia 22mm vs. 30mm
Qual tamanho de recorte de painel você precisa?
Blocos de contato: NO vs. NC
Como escolher e conectar blocos de contato
Ferramenta localizador de botões
Encontre o botão certo por tipo, tamanho e cor