30mm diameter beautiful Japanese Seimitsu model PS-14-KN Translucent Japanese Arcade Push Button with 2.8mm wide terminals and thread.
Research Notes
1. Overview
The Seimitsu PS-14-KN is a 30 mm translucent, screw-in arcade pushbutton — Seimitsu's answer to Sanwa's OBSC/OBSN line. Seimitsu buttons have a slightly stiffer, more 'clicky' feel than Sanwa, with a larger plunger-to-rim ratio. In the PS-14 scheme: K = translucent (clear) plunger, N = screw-in (neji) mount, 30 mm. Suits thicker panels; uses a built-in microswitch.
2. Technical Specifications & Compatibility
See the structured specs on this page (diameter, mounting, plunger/finish, microswitch). These are standard arcade-button form factors — confirm the panel cutout (30 mm / 24 mm / 18 mm as applicable) and the snap-in vs screw-in mount for your panel thickness before ordering.
3. Sources
- https://focusattack.com/seimitsu-ps-14-kn-pushbutton/
- https://www.slagcoin.com/joystick/pushbuttons.html
2 sources
- Seimitsu PS-14-KN — 30 mm Translucent Screw-In Arcade Pushbutton — focusattack.com
- Seimitsu PS-14-KN — 30 mm Translucent Screw-In Arcade Pushbutton — www.slagcoin.com
Especificações
|
Arcade express id
|
672
|
|
Device type
|
Seimitsu PS-14-KN 30mm translucent screw-in arcade pushbutton
|
|
Diameter
|
30mm
|
|
Finish
|
Translucent plunger
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Built-in Seimitsu microswitch
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Screw-in
|
|
Reference pn
|
PS-14-KN (AX-672 is an Arcade Express catalog ID)
|
|
Weight kg
|
0.020000
|
Referência rápida de instalação
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensões
Solução de problemas
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Especificações rápidas
- Arcade express id
- 672
- Device type
- Seimitsu PS-14-KN 30mm translucent screw-in arcade pushbutton
- Diameter
- 30mm
- Finish
- Translucent plunger
- Microswitch Type
- Built-in Seimitsu microswitch
