30mm diameter beautiful Japanese Seimitsu model PS-14-K Snap-In Translucent Japanese Arcade Push Button with 2.8mm wide terminals.
Especificações
|
Arcade express id
|
829
|
|
Weight kg
|
0.020000
|
Referência rápida de instalação
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Dimensões
Solução de problemas
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Especificações rápidas
- Arcade express id
- 829
- Weight kg
- 0.020000
