Lichicx Raw Switches are silent switches designed by Geon. Lichicx is known for their silent switches but availability was hard to come by. With this new Raw switch, it offers a great, stock silent switch without the hassle. Lichicx Raw Silent Switches Feature: 18 included in each pack Manufactured by Lichicx Top Housing: PC Bottom Housing: Nylon Stem: POM+PTFE Pre-Travel: 2.0mm Total Travel: 4.0mm Operating: 46.0g Bottom-Out: 57.5g Spring: Single-Stage, Silver Plated Contacts: Copper, Silver Plated 5-Pin, PCB Mount Lubed Price: $0.50 per switch Available in: Linear Tactile, Small Bump: Tactile Force: 52.0g Tactile, Big Bump: Tactile Force: 62.0g Includes: 18 Lichicx Raw Switches
Notas de Pesquisa
1. What this is
Lichicx Raw Silent Switches is a mechanical keyboard switch from Lichicx. It is silent.
2. Spec decode (from product name)
- Silent: yes (dampened)
3. Compatibility & use
Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.
4. Data-quality note
This is identified as a Lichicx keyboard switch, but the type/force were not stated in the name — confirm the full spec against the manufacturer. Flagged needs-verification. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)
5. Sources
- Lichicx product page / keyboard-switch community databases
- Distributor / vendor listing — search the exact switch name
Fonte
- Lichicx Lichicx Raw Silent Switches — keyboard-switch spec
Especificações
|
Device class
|
mechanical keyboard switch
|
|
Enriched by
|
keyboard-decoder-2026-08-12
|
|
Pn status
|
needs-verification
|
|
Product type
|
Switches
|
|
Series description
|
Lichicx mechanical keyboard switch
|
|
Shopify id
|
6979282501697
|
|
Silent
|
true
|
|
Vendor
|
Lichicx
|
Referência rápida de instalação
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensões
Solução de problemas
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Especificações rápidas
- Device class
- mechanical keyboard switch
- Enriched by
- keyboard-decoder-2026-08-12
- Pn status
- needs-verification
- Product type
- Switches
- Series description
- Lichicx mechanical keyboard switch
Saiba mais
Graus de proteção IP explicados
O que IP65, IP66, IP67, IP69K significam para sua aplicação
Guia 22mm vs. 30mm
Qual tamanho de recorte de painel você precisa?
Blocos de contato: NO vs. NC
Como escolher e conectar blocos de contato
Ferramenta localizador de botões
Encontre o botão certo por tipo, tamanho e cor