QUINN TACTILE

Ativo

Gateron Quinn Tactile Switch

Gateron QUINN TACTILE — Gateron Quinn Tactile Switch

Gateron Quinn Switches! The  Gateron Quinn Switch  is a tactile switch by Gateron that has a feel very similar to the Baby Kangaroo switch, but a different sound profile. The same 22mm double-staged spring and tactile stem are used, however the Quinn uses a full nylon housing. A fun spin on an already unique tactile switch! Like the color and materials but want to customize the feel and sound? Check out our  slow springs  and  Accessories  for all your switch modding essentials.  Available in quantities of 36. Switch Type Tactile Manufacturer Gateron Top Housing Material Nylon Bottom Housing Material Nylon Stem Material POM Spring Weight 59±15g operating force, 22mm Mounting Pins 5-pin Factory Lube Light

Notas de Pesquisa

1. What this is

Gateron Quinn Tactile Switch is a mechanical keyboard switch from Gateron. It is tactile.

2. Spec decode (from product name)

  • Switch type: tactile

3. Compatibility & use

Standard MX-style keyboard switch. Choose by feel (linear/tactile/clicky), actuation force, and sound (silent vs standard); 5-pin PCB-mount switches also fit plate-mount boards. Hot-swap or solder depending on your board.

4. Data-quality note

The switch type is decoded from the name; the exact actuation force and mount should be confirmed against the manufacturer's spec. Flagged decoded-partial. (Note: some of these rows are catalogued under a generic push-button/arcade-button category in the source data; the correct device class is keyboard switch, recorded in the specs above.)

5. Sources

  • Gateron product page / keyboard-switch community databases
  • Distributor / vendor listing — search the exact switch name

Fonte
  1. Gateron Gateron Quinn Tactile Switch — keyboard-switch spec

Especificações

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
decoded-partial
Product type
Accessories
Series description
Gateron mechanical keyboard switch (tactile)
Shopify id
7120492232815
Switch type
tactile
Vendor
Stocked

Referência rápida de instalação

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensões

Solução de problemas

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotos e Desenhos

Imagens: cdn.shopify.com

Onde comprar

Faixa de preço

$10.95 — $22.95

across 2 sellers in US dollars

Especificações rápidas

Device class
mechanical keyboard switch
Enriched by
keyboard-decoder-2026-08-12
Pn status
decoded-partial
Product type
Accessories
Series description
Gateron mechanical keyboard switch (tactile)